General Features
Hot and cold laminator
Depending on the user request, which is capable of both hot and cold lamination our model, if required, after the opening of Level 3~5 minutes between takes.Note: in our country, 99% used although hot laminating, cold laminating for different lamination film is used.
Anti-Jam
Latch receiving the waste through a specially developed, enables you to manually remove any possible blockage.
In case of congestion, the user pushing down on the latch, the idle manually by pulling the film, can be easily removed from the machine.
Between 80 and 125 Micron Lamination
With between 90 and 125 microns laminating film lamination technology improved, elegant 418 muhlen that they can cover laminating machine, film cover on the grid into the machine to be covered with the desired document or can get easily.
Fast Warm-Up Time
After opening 3~5 minutes in between muhlen 418 reaching a level sufficient for the model are being made available quickly at the first opening.
In addition, the specially designed automatic anti-jam system provides impeccable service.
Special Cylinder System
Special design of “double cylinder to prevent sticking and burning and with the system carries out a smooth and glossy lamination.
Smooth and fast without leaving any scratches and breakage without performing our model in a manner that the coating LED light system warns the user if necessary.
